Description

NEW!!! NW Custom Guitars # 1 Best Seller- Conductive Shielding Paint for Guitars and Bass! Get That Noisy Guitar or Bass Quiet for under $15 Bucks! !!CHEAP!! Use on Strat's, Tele's, LP's, Explorer's, Flying V's or any guitar or bass you need quiet. Product Description This conductive shielding paint is a great way for quieting all noisy Strat, Tele, LP style guitars! The easiest way to shield instrument pickup cavities, jack holes, control cavities and other smaller areas. When connected to electrical ground, the shielded surfaces creates a "Faraday Cage" helps reduce noise, hum and radio interference. It cleans up with water while still wet, and dries overnight. This is for 1 guitar application. Application: Apply up to 3 thin even coats 24hrs apart (or use hair dryer to speed up process) best to allow to air dry naturally for 24hrs before applying each coat as this paint is water based. Make sure the foil on Fender , LP style pickguards or control covers, touches conductive paint for continuity. On LP style guitars use copper tape on control covers for continuity. Don't use conductive paint on the back of pickguards or control covers. Please note: Please check out our Full Kit! You'll get 400 grit sandpaper, Hobby brush applicator, peel and stick Copper Tape and full color picture instructions. Instructions link: What's included? 1 - 1oz container with Conductive Shielding Paint. (Enough for 1 guitar application). NOTE: DOES NOT INCLUDED APPLICATOR.